CONTRACTING

If you have trees on your site that need pruning, removal or management, feel free to contact us to get experienced professional advice on a range of solutions.

Free 15-minute Phone Call | No Obligation
 
 

Removal of Deadwood

Deadwood is an area of the tree that has died. It appears brittle and without leaves or needles. It is however part of a trees natural life cycle and can be left on certain occasions and in some areas as it provides very important habitat for wildlife.

 

Reasons to remove deadwood:


Appearance

 

A large amount of deadwood is not pleasing to the eye, removal will restore balance to the tree and allow it to fulfil its full potential as sunlight and wind become accessible to all branches.

 

Prevention

 

It is important to prevent the possibility of damage to the tree as deadwood is brittle it can break in storms exposing the essential heartwood structure giving rise to further damage and big fungal disease

 

Safety

 

This is a significant   reason to remove deadwood.  Falling deadwood is a safety concern in urban environments as it has the potential to cause damage to you, your neighbour’s property, as well as personal injury.  There can be potential liability concerns. Trees are the responsibility of the land owner in which they grow.

 

Tip: Why not ask for a quantity of dead wood to be stacked safely in an appropriate area of your garden. It can support a surprising range of wildlife.


BACK TO TOP

Formative Pruning

Formative pruning is the process of shaping a tree and is generally undertaken while trees are young. It gives tree the correct structure for its mature years and aims to leave a tree free of defects. This is particularly important for fruit bearing trees as a crown of cluttered branches will yield smaller, lower quality fruit.

 

Crown Thinning

This involves the selective removal of branches and stems, primary to allow light penetration and increase air movement throughout a tree. It prompts good tree health along with creating a less imposing tree.

BACK TO TOP

Crown Lifting

When the crown of a tree is lifted the lower branches are removed so increasing the clearance between the ground and lower branches. Removing the lower branches could improves traffic or pedestrian access, allow more light into an area or improve the trees appearance. 

Crown lifting does minimal damage to a tree as long as the pruning is proportionally correct Incorrect pruning can cause stronger growth in the top of the tree where winds are stronger and as the tree is without its counterbalancing lower branches it becomes vulnerable to storm damage.

 

The crown ratio should be around sixty percent which means the tree should have live branches on around sixty percent of the tree trunk.

BACK TO TOP

 

Crown Reduction

 Crown reduction is the pruning of branches of a tree from the tip.   It is usually specified in metres and reduces the canopy of the tree both vertically and laterally. The pruning is carefully carried out at specific points along the branches to ensure healthy regrowth. Reducing the crown of a tree can prolong its life but usually the reasons are: To increase light into an area by reducing its size, encourage grass to grow under the tree or to improve its overall appearance.

 

Reducing the crown reduces its sail when in full leaf so it is less liable to storm damage but it is always advisable to seek and follow the advice of an arborist if a tree has any potential to be a hazard.

BACK TO TOP

 

Stump Grinding & Alternatives

The stump of a tree can be left, just above ground level. There are both advantages and disadvantages regarding this. Some species of tree are very likely to regrow while other can sprout new growth in surprising areas!

Tree stumps do have the potential  to spread decay and invite unwanted pests into gardens. They often, with time become mouldy and grow fungi which can be dangerous to pets and small children. In certain areas they can be a trip hazard or just stop ongoing landscaping progress.

 

Grinding the stump mechanically is an effective and efficient way of entirely removing all traces of the tree above ground. This is done with a machine from the size of a lawn mower upwards, it grinds the stump with its metal teeth leaving only wood chip which mixes with the surrounding soil.

The roots die as they need the nutrients that can only be supplied by the trees leaves.

BACK TO TOP

 

Chemically Injecting a Tree Stump with Poison

 Small tree stumps can be injected with poison shortly after felling. A cap is placed on the tree stump to protect animals and children.

BACK TO TOP

Hedge Management

From large-scale commercial projects to small garden it is aesthetically important and as a good neighbour to maintain and manage growth of hedges. We offer advice on hedge species as well as contract maintenance.

Hedge Removal

Contract Hedge Maintenance

Hedge Planting

 

Pollarding

 Pollarding is a pruning system in which all live growth of the tree is removed. It creates a tree pole with an interesting “knuckled” top. The practice started in walled cities in Europe where space was limited. Today it is still used as a way of managing trees, either due to lack of space or to manage defects. Pollarded trees do require regrowth to be removed every 2 to 4 years.

BACK TO TOP

Felling, Removal, & Site Clearance

 Trees can be removed as a whole where space allows or felled by section and lowered with great precision using rigging equipment or using a crane. We offer a site clearance service covering gardens to small building sites.

BACK TO TOP

Compaction Alleviation

 One of the main causes of tree decline is soil compaction. With the use of specialised equipment, it is possible to decompact the rooting area of a tree.  During the same process there is opportunity to incorporate nutrients into the soil which is beneficial to the health of a tree.

BACK TO TOP

 Have more questions?

Free 15-minute Phone Call | No Obligation